Get a supported Wemo device back online.
Fluxe helps reconnect compatible factory-reset Wemo plugs and switches to your Wi‑Fi. Start with the device model, then follow the path that fits your setup.
Before you begin: keep the device label and, where applicable, its Apple Home setup code. Support depends on model, firmware, and network.
Apple Home
- Confirm the model is supported by Fluxe.
- Reconnect it to Wi‑Fi in Fluxe.
- Use the Apple Home details shown for eligible devices.
- Keep the original setup code available when applicable.
Home Assistant
- Reconnect the supported device locally with Fluxe.
- Choose the Home Assistant integration path appropriate to the device.
- Confirm local control before building automations.
Supported models
Fluxe sets up and controls these Wemo Wi‑Fi models on your local network. Results still depend on firmware and network.
| Model | SKU | In Fluxe |
|---|---|---|
| Wemo Mini Smart Plug | F7C063, WSP070, WSP080 | Setup and on/off |
| Wemo Outdoor Plug | WSP090 | Setup and on/off |
| Wemo Switch | F7C027 | Setup and on/off |
| Wemo Insight | F7C029, F7C061 | Setup and on/off |
| Wemo Smart Light Switch | WLS040, WLS0403, F7C030, F7C062 | Setup and on/off |
| Wemo Dimmer | F7C059, WDS060 | Setup, on/off and brightness |
| Wemo Switch + Motion Sensor | F5Z0340 | Setup and some controls |
Thread models (WLS0503, WSP100, WSC010, WDC010) keep working in Apple Home and do not need Fluxe. Fluxe shows device information only for Wemo Link, Maker, Motion Sensor, bulbs, the HomeKit Bridge and the Wemo kitchen appliances.
A device stopped responding
Fluxe shows Needs attention when it cannot reach a saved device. Try these steps in order.
1. Restart the device
- Wemo Dimmer (F7C059, WDS060): hold the bar below the power button for 2 seconds. Let go when the light turns white.
- Wemo Smart Light Switch (WLS040, WLS0403): remove the faceplate. Hold the bar under the Wemo logo for 2 seconds. Let go when the ring light turns white.
- Plugs: unplug it for 10 seconds, then plug it back in.
- Other models: turn off its power for 10 seconds, then turn it back on.
Wait 2 minutes, then tap Check again in Fluxe.
2. Still not working? Set it up again
- Wemo Dimmer: hold the bar for more than 5 seconds. Let go when the light blinks blue. This erases its Wi‑Fi settings. Do not hold until the light turns red, which erases its name and rules.
- Wemo Smart Light Switch: hold the bar until the ring light turns blue, then let go. Do not hold until it turns red, which is a factory restore.
- Wemo Mini (F7C063): with it plugged in, hold the power button until the light flashes white quickly. Let go.
- Other models: use the reset instructions for the exact model.
Then tap Set up again in Fluxe.
Common setup issues
- Setup does not finish: confirm you are connecting to the intended home Wi‑Fi network and stay near the device.
- Device is not found after setup: in Fluxe, open Settings and export the latest log. Send the form below, then attach the log file when you reply to our email.
- Apple Home pairing fails: check for an old or unresponsive Apple Home record before trying another reset.
What Fluxe does not support directly
Fluxe does not directly recover Alexa or Google Home. Those paths require bridge or cloud-service complexity outside Fluxe’s local setup model. Fluxe does not restore retired Wemo cloud integrations.